Lucus curette - Helmut Zepf (41.855.01ZS) - Delynov
Optimize your surgical curettage with the Helmut Zepf Lucas curette
Designed for increased surgical precision, this serrated curette facilitates the excision of pathological tissues during your dental procedures.
- Technical feature: 2.5mm serrated working part for optimized cutting efficiency.
- Material: High-quality medical stainless steel.
- Ergonomics: Manual instrument designed for precise handling in a surgical environment.
- Safety: Class I medical device, delivered non-sterile and reusable after sterilization.
Product features
The Curette de Lucas crantée - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 41.855.01ZS.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel utilisé pour travailler sur la dent / l'appareildentaire lors d'un traitement chirurgical. Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf serrated Lucas curette (41.855.01ZS)?
The serrated Lucas curette, referenced under code 41.855.01ZS by the manufacturer Helmut Zepf, is a high-precision manual dental instrument. Designed for oral surgery interventions, it is manufactured from medical stainless steel, a material selected for its robustness and compatibility with the requirements of the surgical environment. This device is distinguished by its specific structure which allows for efficient manipulation during operative acts. As a Class I instrument, it meets the essential safety standards for medical devices. Its ergonomic design and the quality of its alloy make it an indispensable tool for practitioners seeking reliability and performance when working on dental tissues or dental apparatus.
What are the clinical indications for this Helmut Zepf instrument?
The intended use of the Helmut Zepf serrated Lucas curette primarily concerns dental surgical treatments. It is indicated for working directly on the tooth or dental apparatus during invasive procedures. This manual instrument facilitates the cleaning of sockets, the excision of granulomatous tissue, or curettage during various phases of oral surgery. Its use is strictly reserved for qualified healthcare professionals. The manufacturer specifies that the instrument must be handled with care to guarantee the precision of the surgical gesture. Thanks to its serrated design, it offers optimal efficiency in the treatment of operative sites, thus allowing for adequate preparation before continuing care or the placement of complementary devices.
What are the technical characteristics of the 41.855.01ZS curette?
The Helmut Zepf Lucas curette (reference 41.855.01ZS) is developed from high-quality medical stainless steel. It belongs to the category of manual instruments that are non-sterile upon delivery. A major technical characteristic lies in its mechanical resistance, although no maximum limit for processing cycles can be defined due to the nature of the materials used. Before each intervention, the practitioner must imperatively inspect the instrument to detect any visible damage such as cracks, breaks, or defects on the cutting edges. The absence of such defects guarantees the maintenance of the cutting and gripping performance necessary for the success of the dental surgical act.
What are the contraindications for the use of this instrument?
The main contraindication related to the use of the Helmut Zepf serrated Lucas curette is intolerance or hypersensitivity to metals. As the instrument is made of medical stainless steel, contact with the patient may trigger an allergic or hypersensitivity reaction in sensitive subjects. If such a reaction occurs during surgical treatment, the manufacturer Helmut Medizintechnik GmbH stipulates that the procedure must be immediately stopped and that the necessary medical measures must be taken accordingly. It is therefore essential to evaluate the patient's allergic history before any use. Furthermore, the use of an instrument showing signs of wear or structural damage is formally prohibited to avoid any risk of intraoperative complication.
What are the maintenance and sterilization precautions?
Being delivered non-sterile, the Helmut Zepf Lucas curette requires a rigorous reprocessing protocol. All instruments must be cleaned, disinfected, and sterilized before the very first use, as well as before each subsequent use. Complete cleaning is a critical step to ensure patient safety and the longevity of the stainless steel. The professional must check the compatibility of the instrument with other products used during the sterilization cycle. It is essential never to use damaged or worn products. Although the number of processing cycles is not limited by a fixed value, natural wear and visible damage constitute the end-of-life criteria for the instrument, requiring its immediate removal from the instrument pool.
Who is the manufacturer and what standards are respected?
The official manufacturer of this instrument is the company Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This medical device is classified as Class I according to current regulations. Compliance with rigorous manufacturing protocols by Helmut Zepf guarantees an instrument that conforms to the requirements of professional dental surgery. The instructions provided by the manufacturer emphasize the importance of respecting safety and use instructions to maintain product compliance. As a Class I device, it is designed to offer a high level of safety and constant performance, provided that reprocessing (cleaning, disinfection, and sterilization) is carried out according to standard hospital and dental norms before each surgical act.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |