Elevator X - DESMO - TOOL - Helmut Zepf (17.007.05) - Delynov,
Optimize your extractions with the X-DESMO Elevator by Helmut Zepf
This high-precision manual instrument allows for the efficient lifting of teeth or residual roots while preserving the integrity of the surrounding tissues.
- Instrument type: X-DESMO Elevator (XTool 5).
- Design: Straight model with a 4.0mm width.
- Material: High-quality medical stainless steel.
- Safety: Class Ir device, delivered non-sterile, suitable for sterilization.
Product features
The Élévateur X - DESMO - Instrument - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Intended use: Surgical instrument intended for oral, dental, periodontal, and implant surgery, used by trained practitioners in sterile environments.
- Reference: 17.007.05.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION
Instrument dentaire manuel utilisé pour soulever les dents ou les racines dentairesrésiduelles lors de l'extraction d'une dent. Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the X-Elevator - DESMO Helmut Zepf (17.007.05)?
The X-Elevator - DESMO, bearing reference 17.007.05, is a high-precision manual dental instrument designed by Helmut Zepf Medizintechnik GmbH. This specialized tool is manufactured from medical stainless steel, a material selected for its robustness and compatibility with the requirements of oral surgery. As an instrument in the INSTRU category, it is specifically structured to facilitate extraction interventions. Its design allows for rigorous handling by healthcare professionals during clinical procedures. This device is delivered non-sterile by the manufacturer and requires a complete cycle of cleaning, disinfection, and sterilization before its first use, as well as between each patient, to guarantee optimal surgical safety within the dental practice.
What are the clinical indications for this instrument?
This Helmut Zepf brand instrument is exclusively indicated for use in dental and oral surgery. Its intended purpose is to serve as a manual lever to lift teeth or extract residual dental roots during an extraction procedure. The primary indication therefore concerns dental avulsion, where the instrument allows for the mobilization of the dental element or remaining radicular fragments. The use of this elevator is strictly reserved for qualified healthcare professionals. The practitioner must imperatively verify the integrity of the instrument before each use, ensuring the absence of visible damage, cracks, or defects on the cutting edges, as the use of damaged or worn products is prohibited to maintain the effectiveness of the surgical act.
What are the technical characteristics of the X-Elevator - DESMO?
The X-Elevator - DESMO (reference 17.007.05) is characterized by its composition of high-quality medical stainless steel, guaranteeing the mechanical resistance necessary for the leverage forces exerted during extraction. Unlike suture devices, this instrument does not have a needle or thread. Its technical specificities lie in its capacity to undergo repeated reprocessing cycles. Due to its design and the materials used by Helmut Zepf, there is no defined maximum limit for the number of achievable treatment cycles, as long as the instrument does not show signs of wear or structural degradation. Each product must be inspected minutely before use to detect any potential breakages or alterations of the sharp edges that could compromise patient safety.
What are the contraindications for the use of this instrument?
The main contraindication related to the use of this Helmut Zepf elevator concerns metal intolerance. Contact with medical stainless steel can cause a hypersensitivity reaction in certain sensitive patients. If such an allergic reaction or intolerance manifests during the intervention, the procedure must be immediately interrupted and necessary medical measures must be taken accordingly. Furthermore, the use of the instrument is contraindicated if it shows visible damage such as cracks, breaks, or defects on the active parts. Use by unqualified persons also constitutes a contraindication, as the device is exclusively reserved for healthcare professionals trained in dental extraction techniques.
What are the maintenance and safety precautions?
As a non-absorbable and reusable instrument, strict reprocessing precautions apply. All instruments must be cleaned, disinfected, and sterilized before the first use and after each subsequent use. It is crucial to clean each product before proceeding to sterilization to eliminate any biological residue. The practitioner must verify compatibility with other products used simultaneously. Particular attention must be paid to the visual examination: any sign of wear, crack, or defect on the cutting edges must result in the immediate disposal of the instrument. The durability of the device depends on rigorous compliance with these cleaning and sterilization protocols, in accordance with the instructions provided by the manufacturer Helmut Zepf Medizintechnik GmbH.
Who is the manufacturer and what standards are respected?
The X-Elevator - DESMO is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This medical device is classified as Class I according to the current regulations. As a Class I instrument, it meets the safety and performance requirements imposed for manual dental instruments. The manufacturer specifies that the product is delivered non-sterile and that its compliance relies on rigorous maintenance by the healthcare professional. Cleaning and sterilization protocols must be followed scrupulously to maintain the instrument in a state compliant with its intended use. Specific CE marking is not mentioned in the provided source data, but compliance with the Class I classification ensures a strict regulatory framework for its distribution and use in dental surgery.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs that minimize tissue trauma. Precision and reliability are top priorities.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |