Graduated probe - Helmut Zepf (24.454.06) - Delynov
The Sonde graduée - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.454.06.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel utilisé pour travailler sur l'appareil dentaire dans le cadre d'un traitement parodontal. Il sert à sonder les poches gingivales ou également à éliminer le tartre mou et dur de la dent/de l'appareil dentaire. Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf graduated probe (24.454.06)?
The Helmut Zepf graduated probe, referenced under code 24.454.06 at Delynov, is a high-precision manual dental instrument designed for periodontal examination and care. Manufactured from high-quality medical stainless steel by Helmut Zepf Medizintechnik GmbH, this probe is an indispensable tool for oral health professionals. As a Class I medical device, it meets safety and performance requirements for rigorous clinical use. This instrument is delivered non-sterile and requires a complete protocol of cleaning, disinfection, and sterilization before its first use and between each patient to guarantee impeccable hygiene within the dental practice.
What are the clinical indications for this instrument?
This Helmut Zepf graduated probe is specifically indicated for work on the dental apparatus within the framework of periodontal treatments. Its primary use consists of probing gingival pockets to evaluate periodontal health and measure sulcus depth. Beyond diagnosis, this manual instrument is also intended for the removal of soft and hard tartar present on the tooth or dental apparatus. Its design allows for precise handling during prophylaxis or periodontal maintenance interventions, offering the practitioner optimal tactile sensitivity to detect surface irregularities and calcified deposits.
What are the technical characteristics of the 24.454.06 probe?
The Helmut Zepf 24.454.06 probe is distinguished by its medical stainless steel construction, a material chosen for its durability and resistance to repeated sterilization cycles. Although there is no defined maximum limit for the number of processing cycles due to the robustness of its design and the materials used, the instrument must undergo systematic visual inspection. The practitioner must check for the absence of visible damage, such as cracks, breaks, or defects on the active parts, before any use. Any marked wear or structural deformation requires the immediate removal of the product to ensure patient safety and clinical procedure effectiveness.
What are the contraindications for the use of this probe?
The main contraindication for using this medical stainless steel instrument is metal intolerance in the patient. A hypersensitivity reaction may be triggered upon contact with the instrument. If such an allergic reaction or intolerance occurs during the procedure, the manufacturer Helmut Zepf Medizintechnik GmbH specifies that the procedure must be immediately interrupted. Necessary medical measures must then be taken accordingly to manage the hypersensitivity. It is therefore recommended to validate the absence of a history of allergies to the metallic components of stainless steel before any periodontal intervention with this tool.
What are the maintenance and safety precautions?
The use of the Helmut Zepf probe is strictly reserved for qualified healthcare professionals. Safety relies on rigorous reprocessing: each product must be cleaned, disinfected, and sterilized before the first commissioning and after each subsequent use. It is imperative never to use damaged or worn products. Compatibility with other products used during treatment must also be verified beforehand. Due to its non-resorbable nature and its function as a manual instrument, vigilance must focus on the integrity of the graduations and the tip to ensure exact periodontal measurements and effective scaling without damaging soft tissues.
Who is the manufacturer and what standards are respected?
The instrument is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This medical device is classified as Class I according to current regulations. The manufacturer emphasizes that the design of the instrument and the selected materials allow for prolonged use, although the number of achievable treatment cycles depends on maintenance and intended use. Compliance with safety instructions, including systematic cleaning and sterilization, is essential to maintain the compliance of the device throughout its useful life within the dental clinic or oral surgery center.
State of the art
Surgical medical consumables play a decisive role in operative safety.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |