Curette Tip. M4X0.5. - Helmut Zepf (24.751.102TA)
The POINTE DE CURETTE. M4X0.5. - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.102TA.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf CURETTE TIP M4X0.5?
The CURETTE TIP M4X0.5, bearing reference 24.751.102TA, is a manual dental instrument designed by the manufacturer Helmut Zepf Medizintechnik GmbH. This device is manufactured from medical grade stainless steel, ensuring robustness adapted to the requirements of dental surgery. As an instrument in the INSTRU category, it is presented as an interchangeable tip intended to be mounted on a compatible handle. This product is delivered non-sterile and requires a complete preparation protocol before any intervention. Its design allows for precise integration into the practitioner's therapeutic arsenal for periodontal or surgical care requiring meticulous curettage.
What are the clinical indications for this Helmut Zepf instrument?
The main indication for this Helmut Zepf manual dental instrument lies in oral care procedures requiring the use of a curette. It is specifically intended for professional use by qualified healthcare practitioners. Its role is to assist the dental surgeon or periodontist in cleaning dental surfaces, removing tartar, or treating soft tissues during oral surgeries. The use of this instrument must be preceded by a verification of the tip's integrity to guarantee the effectiveness of the clinical gesture and the safety of the patient during the intervention.
What are the technical characteristics of reference 24.751.102TA?
The Helmut Zepf curette tip is characterized by an M4X0.5 technical thread, ensuring a stable and secure connection on compatible instrument supports. Manufactured in medical stainless steel, it belongs to Class I of medical devices according to current regulations. An essential characteristic of this product is its reusable nature: due to the design and materials used, there is no defined maximum limit of processing cycles, although the service life depends on visible wear. Before each use, the practitioner must imperatively inspect the instrument to detect any cracks, breaks, or defects on the cutting edges.
What are the contraindications for the use of this curette tip?
The main contraindication related to the use of this medical stainless steel instrument concerns metal intolerance in the patient. Contact with the instrument can trigger a hypersensitivity reaction or a specific intolerance. The manufacturer Helmut Zepf specifies that if such a reaction occurs during the surgical procedure, the procedure must be immediately stopped and necessary medical measures must be taken. Furthermore, the use of this instrument is strictly prohibited if it shows visible damage or marked wear, as this could compromise the safety of the care or the integrity of the treated tissues.
What are the maintenance and sterilization precautions?
All Helmut Zepf instruments must follow a strict cleaning, disinfection, and sterilization protocol before the first use and after each subsequent use. As they are delivered non-sterile, it is crucial to process them fully to eliminate any risk of cross-contamination. The reprocessing process must be carried out with care, taking into account that the instrument is reserved exclusively for healthcare professionals. The practitioner must also verify the compatibility of the tip with the other products and handles used. Any damaged product, presenting cracks or dull edges, must be immediately discarded from clinical use.
Who is the manufacturer and what standards are respected?
The device is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This official manufacturer guarantees that the CURETTE TIP M4X0.5 meets the requirements for Class I medical devices. Although the specific CE marking is not detailed in the source data, the product complies with directives relating to manual dental instruments intended for professionals. Compliance with the safety and maintenance instructions issued by Helmut Zepf is essential to maintain the conformity and performance of the instrument during surgical or periodontal interventions.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |