Curette Tip. M4X0.5. - Helmut Zepf (24.751.113G)
The POINTE DE CURETTE. M4X0.5. - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.113G.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the CURETTE TIP M4X0.5 Helmut Zepf?
The CURETTE TIP M4X0.5, referenced under code 24.751.113G by the manufacturer Helmut Zepf, is a high-precision manual dental instrument. Designed in medical stainless steel, this interchangeable tip is intended to be mounted on compatible handles. This device belongs to the category of instruments (INSTRU) and benefits from the manufacturing rigor of Helmut Zepf Medizintechnik GmbH. As a Class I device, it meets the regulatory requirements for use in dental practices and oral surgery. Its stainless steel design ensures optimal durability, although it is imperative to check for the absence of visible damage or wear, such as cracks or defects on the cutting edges, before each intervention.
What are the clinical indications for this Helmut Zepf instrument?
The CURETTE TIP M4X0.5 is indicated as a manual dental instrument for care and oral surgery procedures. Its main use concerns the removal of tartar, root planing, or tissue cleaning within the framework of periodontal or implant treatments. This device is exclusively reserved for qualified healthcare professionals. The manufacturer specifies that the instrument must be systematically integrated into a rigorous care protocol. Before the first use, as well as after each subsequent use, the tip must be cleaned, disinfected, and sterilized to guarantee patient safety and the effectiveness of the clinical gesture. It is essential to verify compatibility with other products used during the procedure.
What are the technical characteristics of reference 24.751.113G?
Technically, this instrument is distinguished by its M4X0.5 thread, allowing precise and stable fixation on suitable Helmut Zepf instrument handles. Manufactured from high-quality medical stainless steel, this curette tip is designed to withstand repeated cycles of thermal and chemical treatment. The manufacturer, Helmut Zepf Medizintechnik GmbH, delivers this product non-sterile, which necessitates a complete preparation phase before use. Although there is no defined maximum limit for reprocessing cycles due to the robustness of the materials used, the user must inspect the instrument to detect any trace of wear, breakage, or degradation of the sharp edges that could compromise surgical precision.
What are the contraindications for the use of this curette tip?
The main contraindication related to the use of this medical stainless steel instrument is metal intolerance in the patient. A hypersensitivity reaction may be triggered upon contact with the instrument. If such an intolerance reaction occurs, the clinical procedure must be immediately interrupted and the necessary medical measures must be taken. Furthermore, the use of this instrument is prohibited if it shows visible damage, cracks, or excessive wear of the cutting edges (sharp edges). The use of damaged products presents a risk to patient safety and the success of the surgical act. Finally, this device must not be used by unqualified persons, its use being strictly reserved for healthcare professionals.
What are the maintenance and sterilization precautions?
Like all instruments of the Helmut Zepf brand, the CURETTE TIP M4X0.5 is delivered non-sterile. It must imperatively undergo a complete cycle of cleaning, disinfection, and sterilization before the very first use, and then after each use. The reprocessing process must be meticulous: each product must be cleaned individually. Due to its stainless steel composition and its technical design, it is not possible to define a maximum limit of treatment cycles, but the lifespan depends directly on maintenance and pre-operative inspection. It is crucial never to use instruments presenting structural defects or a loss of sharpness, as this alters the precision of the gesture and the safety of the surgical field.
Who is the manufacturer and what standards are respected?
This medical device is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. The manufacturer is recognized for its expertise in the design of high-tech dental instruments. This product is classified as a Class I medical device according to the regulations in force. It respects the strict quality standards imposed for manual surgical instruments made of stainless steel. Traceability is ensured by the product reference 24.751.113G. As a Class I instrument, it is designed to offer constant performance in a clinical environment, subject to compliance with the instructions for use and safety provided by Helmut Zepf, particularly concerning mandatory cleaning and sterilization before any intervention.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |