Elevator X Luxa Tool 3 Helmut Zepf (17.007.03) - Delynov - Dental Surgery Elevator X Luxa Tool 3 by Helmut Zepf (17.007.03)

What is the Helmut Zepf X Luxa Tool 3 Elevator?

The X Luxa Tool 3 Elevator, bearing reference 17.007.03, is a specialized manual instrument for extraction surgery. Manufactured by Helmut Zepf Medizintechnik GmbH, this device is designed in high-quality medical stainless steel. Its structure is optimized to allow the practitioner to exert the forces necessary for lifting dental structures. As a Class I device, it meets the regulatory requirements for non-invasive or invasive instruments for temporary use. This tool is delivered non-sterile and requires a complete preparation protocol before its first use in the office or operating room.

What are the clinical indications?

This instrument from the Helmut Zepf range is specifically indicated for exodontia procedures. Its intended purpose is to lift teeth or residual dental roots during extraction. It is particularly useful in complex cases where the root is fractured or deeply anchored, requiring precise luxation to preserve the integrity of the surrounding alveolar bone. The use of this elevator facilitates the mobilization of the dental element before using a forceps, or allows the complete extraction of small, difficult-to-access root fragments.

What are the technical characteristics?

The X Luxa Tool 3 Elevator (reference 17.007.03) is distinguished by its medical stainless steel construction, a material chosen for its mechanical strength and its ability to withstand repeated processing cycles. Its ergonomic design allows for controlled force transmission during luxation. According to the specifications of the manufacturer Helmut Zepf Medizintechnik GmbH, the instrument does not have a defined maximum limit of processing cycles, this being determined by actual wear and visible damage such as cracks or defects on the cutting edges. It belongs to the category of Class I manual instruments.

What are the contraindications for use?

The main medical contraindication documented by the manufacturer concerns hypersensitivity to metals. An intolerance reaction may occur in the patient upon contact with the medical stainless steel of the instrument. If such a hypersensitivity reaction manifests during the procedure, the procedure must be stopped immediately and the necessary clinical measures must be taken accordingly. In addition, the use of the instrument is strictly contraindicated if it shows visible damage, such as cracks, breaks, or blunt cutting edges, in order to avoid any risk of intraoperative complication.

What are the maintenance and reprocessing precautions?

As it is a non-absorbable and reusable instrument, a strict reprocessing protocol is mandatory. All Helmut Zepf instruments must be cleaned, disinfected, and sterilized before the very first use, as well as after each subsequent use. It is imperative to check for the absence of visible damage and wear before each intervention. The use of damaged or worn products is prohibited. The sterilization process must be complete to ensure patient safety. Compatibility with other products used during surgery must also be verified beforehand by the healthcare professional.

Who is the manufacturer and what standards are respected?

The instrument is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This recognized manufacturer complies with rigorous quality standards for Class I medical devices. The product complies with the requirements of the Medical Device Regulation (MDR). The safety instructions emphasize that the use of this instrument is strictly reserved for qualified healthcare professionals. Following the cleaning and sterilization instructions issued by Helmut Zepf is essential to maintain regulatory compliance and the clinical performance of the elevator over the long term.

State of the art

Specialized surgical instrumentation is evolving towards ergonomic designs.