Curette Tip, M4x0.5 - Helmut Zepf (24.751.111G) - Delynov
The POINTE DE CURETTE. M4X0.5. - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.111G.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf CURETTE TIP M4X0.5?
The CURETTE TIP M4X0.5, referenced under code 24.751.111G by Delynov, is a manual dental instrument designed by the manufacturer Helmut Zepf Medizintechnik GmbH. This medical device is manufactured from medical-grade stainless steel, ensuring robustness suited to the requirements of dental practice. It is an interchangeable part featuring an M4X0.5 thread, intended to be mounted on a compatible handle for curettage procedures. As a Class I device, this instrument meets the regulatory requirements for non-invasive or short-term invasive manual tools, offering practitioners a precise solution for treating dental and periodontal surfaces.
What are the clinical indications for this Helmut Zepf instrument?
This Helmut Zepf manual dental instrument is specifically indicated for oral surgery and dentistry procedures requiring precise curettage. Its intended use is to assist the healthcare professional in removing deposits, cleaning tissues, or preparing sites during periodontal or implant care. The use of this instrument is strictly reserved for qualified healthcare professionals. Its medical stainless steel design allows for fine handling, essential for technical maneuvers in a clinical environment. It is imperative to check the integrity of the instrument, particularly the absence of cracks or defects on the cutting edges, before each intervention to ensure clinical efficacy.
What are the technical characteristics of reference 24.751.111G?
The Helmut Zepf curette tip (ref. 24.751.111G) is distinguished by its precise technical specifications, notably its M4X0.5 thread fixation system. Manufactured by Helmut Zepf Medizintechnik GmbH in Germany, it is designed from medical stainless steel selected for its mechanical resistance. This product belongs to the instrument category (INSTRU) of Class I. Delivered non-sterile, this tip requires a complete cleaning, disinfection, and sterilization protocol before its first use and after each subsequent use. Due to its design and the materials used, the manufacturer states that there is no defined maximum limit for processing cycles, as long as the instrument shows no visible damage.
What are the contraindications for the use of this curette tip?
The main contraindication for using this instrument is the patient's known hypersensitivity or intolerance to metals. Contact with medical stainless steel can trigger a hypersensitivity reaction in some subjects. If such a reaction occurs during the intervention, the procedure must be immediately stopped and necessary medical measures must be taken accordingly. Furthermore, the use of this instrument is formally discouraged if the product shows visible damage or wear, such as cracks, breaks, or defects on the cutting edges. Using a damaged instrument can compromise patient safety and the success of the surgical act.
What are the maintenance and sterilization precautions?
The reprocessing protocol is a critical step for safety. All Helmut Zepf instruments must be cleaned, disinfected, and sterilized before the first use, and then after each use. It is imperative to perform complete cleaning to remove all residues before sterilization. The practitioner must carefully inspect each curette tip to detect any signs of wear or corrosion. Never use damaged products. Although the material allows for many processing cycles, the longevity of the instrument depends on strict adherence to cleaning procedures and systematic verification of compatibility with other products used during the sterilization cycle.
Who is the manufacturer and what standards are met?
The official manufacturer of this device is Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This medical device is classified as Class I according to current regulations. Helmut Zepf products are recognized for their compliance with manufacturing requirements for manual dental instruments. The manufacturer emphasizes that its devices are intended exclusively for healthcare professionals. Traceability and quality are ensured by compliance with the company's rigorous manufacturing protocols. As a Class I instrument, it meets the safety and performance standards applicable to reusable medical devices after sterilization, thus guaranteeing a high level of reliability for dental surgeons.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |