Curette Tip - Helmut Zepf (24.751.111GM5) - Delynov
The Pointe de curette - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.111GM5.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf curette tip (24.751.111GM5)?
The Helmut Zepf curette tip, referenced under code 24.751.111GM5 at Delynov, is a high-precision manual dental instrument. Designed by Helmut Zepf Medizintechnik GmbH, this tip is manufactured from high-quality medical stainless steel, guaranteeing robustness adapted to the requirements of dental surgery. This Class I device is part of the specialized instrumentation range for healthcare professionals. As a manual instrument, it requires expert handling during clinical procedures. Its medical stainless steel structure ensures optimal durability, although the manufacturer specifies that no maximum limit of processing cycles can be defined a priori, as this depends on the actual wear observed during clinical use and reprocessing.
What are the clinical indications for this instrument?
The intended use for this Helmut Zepf curette tip is that of a manual dental instrument. It is specifically indicated for oral and dental surgery interventions requiring precise tissue curettage. Its use is strictly reserved for qualified healthcare professionals. The main indication is based on manual manipulation for the treatment of dental or periodontal surfaces, in accordance with current clinical protocols. Before any application, the practitioner must imperatively check for the absence of visible damage, such as cracks, breaks, or defects on the cutting edges, in order to guarantee the effectiveness of the surgical act and patient safety. The use of damaged or worn products is formally prohibited by the manufacturer.
What are the technical characteristics of the 24.751.111GM5 tip?
The Helmut Zepf curette tip (ref: 24.751.111GM5) is characterized by its medical stainless steel composition, a standard material for Class I instrumentation. This device is delivered non-sterile, which requires a strict preparation protocol before the first use and between each patient. Technical characteristics include mechanical resistance inherent to the steels selected by Helmut Zepf Medizintechnik GmbH. A crucial point of its design is the absence of a predefined limit for reprocessing cycles; the lifespan of the instrument is determined by the professional's visual assessment. It is essential to check the compatibility of this tip with other products and handles used during the surgical procedure.
What are the contraindications for the use of this instrument?
The main contraindication mentioned by the manufacturer Helmut Zepf concerns metal intolerance. Contact with this medical stainless steel instrument may cause a hypersensitivity reaction in certain patients. If such an allergic reaction or intolerance occurs during the procedure, the procedure must be stopped immediately and necessary medical measures must be taken. Furthermore, the use of this instrument is contraindicated if the device shows visible signs of wear, cracks, or defects on the cutting edges. Failure to comply with cleaning, disinfection, and sterilization protocols also constitutes a major contraindication to its use in a clinical setting.
What are the maintenance and sterilization precautions?
The reprocessing of the Helmut Zepf curette tip follows rigorous safety instructions. All instruments must be cleaned, disinfected, and sterilized before the first use, then after each subsequent use. It is imperative to perform a complete cleaning before sterilization to ensure the elimination of all residues. The manufacturer emphasizes that it is very important to inspect each product for potential damage or wear before use. Due to the product design and the materials used, the maximum number of achievable processing cycles cannot be fixedly defined; it is up to the healthcare professional to determine if the instrument retains its functional properties after each sterilization cycle.
Who is the manufacturer and what standards are met?
The device is manufactured by Helmut Zepf Medizintechnik GmbH, whose headquarters are located in Seitingen-Oberflacht, Germany. This product is classified as a Class I medical device according to current regulations. The manufacturer ensures the compliance of its instruments with the safety and performance requirements for manual dental instruments. Each Helmut Zepf curette tip is subject to strict quality controls before being placed on the market. Healthcare professionals must refer to the manufacturer's instructions for cleaning and sterilization to maintain the compliance of the device throughout its useful life. Traceability is ensured by technical reference 24.751.111GM5.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |