Point for instrument for descaling - Helmut Zepf (24.751.123AL) - Delynov
The Pointe pour instrument à détartrer - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.123AL.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf scaling instrument tip (24.751.123AL)?
The Helmut Zepf scaling instrument tip, referenced under code 24.751.123AL at Delynov, is a high-precision manual dental instrument. Designed by Helmut Zepf Medizintechnik GmbH, this tip is manufactured from premium medical-grade stainless steel to ensure optimal performance during prophylaxis and scaling procedures. This device belongs to the instruments category (INSTRU) and is classified as a Class I medical device. Its robust stainless steel structure is specifically adapted to the requirements of dental practices, offering the durability necessary for repeated interventions while maintaining the integrity of manual instrumentation.
What are the clinical indications for this Helmut Zepf instrument?
This manual dental instrument is primarily indicated for dental care procedures involving the scaling and cleaning of tooth surfaces. In oral surgery and preventive dentistry, the Helmut Zepf 24.751.123AL tip allows the practitioner to remove calcified deposits with precision. Its use is strictly reserved for qualified healthcare professionals. The manufacturer specifies that the instrument must be used in accordance with its intended purpose, namely manual intervention on hard dental tissues. It is essential that the practitioner verify the compatibility of this accessory with their other equipment before any clinical intervention.
What are the technical characteristics of the 24.751.123AL tip?
The Helmut Zepf tip (24.751.123AL) is distinguished by its medical stainless steel composition, a material chosen for its resistance and its ability to undergo repeated sterilization cycles. Due to its design and the materials used, the manufacturer Helmut Zepf Medizintechnik GmbH indicates that there is no defined maximum limit for achievable processing cycles, although wear must be monitored. Professionals must imperatively inspect the instrument before each use to detect any visible damage, such as cracks, breaks, or defects on the cutting edges. The use of damaged or worn products is strictly prohibited to ensure patient safety.
What are the contraindications for the use of this instrument?
The main contraindication related to the use of this medical stainless steel instrument is metal intolerance in the patient. Contact with the instrument may trigger a hypersensitivity reaction. If such a reaction occurs during the procedure, the practitioner must immediately stop the intervention and take the necessary medical measures. Furthermore, the use of this instrument is contraindicated if the device shows signs of obvious wear or structural damage (cracks, cutting defects). Compliance with these safety instructions is crucial to prevent any undesirable side effects during dental care.
What are the maintenance and sterilization precautions?
Helmut Zepf products are delivered non-sterile and must imperatively be cleaned, disinfected, and sterilized before the first use, as well as before each subsequent use. The reprocessing process must be complete. It is paramount to clean each product before use to ensure the absence of contaminants. The manufacturer emphasizes that the integrity of the instrument must be systematically verified: tips showing visible damage must never be used. Although the medical stainless steel material allows for many treatment cycles, the vigilance of the healthcare professional remains the rule to determine if the instrument is still fit for clinical use.
Who is the manufacturer and what standards are met by this device?
The device is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This renowned manufacturer ensures the compliance of its instruments with current regulatory requirements. The scaling instrument tip (24.751.123AL) is a Class I medical device, meeting safety and performance standards for manual dental instruments. As a product distributed by Delynov, it benefits from the rigor of German manufacturing. Healthcare professionals can refer to the manufacturer's warnings for reprocessing and safe use, thereby ensuring a high level of protection for patients and users.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |