What is the pin refill for Meisinger Master (MP10)?

The pin refill (reference MP10) is an essential component of the Bone Management® Master-Pin-Control system developed by Meisinger. These are fixation pins designed specifically for membrane stabilization during Guided Bone Regeneration (GBR) procedures. These precision devices allow for secure anchoring in the patient's local bone. Manufactured by Hager & Meisinger GmbH, these instruments are supplied non-sterile, strictly requiring a complete cleaning, disinfection, and sterilization protocol before any surgical intervention, in accordance with the manufacturer's rigorous instructions to ensure patient safety and material integrity.

What are the clinical indications for these fixation pins?

The pins of the Meisinger Master-Pin-Control system are indicated for the precise fixation of apical membrane ends to the local bone. The primary clinical objective is to prevent any micromobility of the membrane, a critical factor for the success of bone regeneration. This device is versatile, allowing for the fixation of different types of materials: resorbable membranes, non-resorbable membranes, as well as titanium-reinforced membranes. Its use is recommended in oral surgery and implantology protocols where primary stability of the barrier is required to protect the graft and promote tissue healing without mechanical interference.

What are the technical characteristics and recommendations for use?

The MP10 refill consists of high-precision pins designed to integrate perfectly into the Master-Pin-Control system workflow. Technically, application must scrupulously respect the recommended and maximum speeds summarized in the instrument overview provided by Hager & Meisinger GmbH in the "Contents" chapter. Compliance with these speed parameters is crucial to ensure correct and safe use during insertion into the bone. As Class IIb medical devices, these pins meet strict quality requirements to ensure consistent performance during critical membrane fixation phases in oral surgery.

What are the contraindications for the use of this device?

The use of these pins presents absolute and relative contraindications. Absolute contraindications include incomplete dentoalveolar growth (except specific cases such as ectodermal dysplasia), acute infection or pathological processes (fever, local inflammation, abscess) near the fixation site, as well as insufficient bone quality or quantity. Relative contraindications concern known allergies or foreign body reactions related to implant materials, systemic disorders, diseases affecting bone metabolism, and medical treatments leading to progressive bone deterioration, such as prolonged use of cortisone or immunosuppressants.

What precautions are associated with the non-resorbable nature of the device?

Although these pins are used to fix resorbable or non-resorbable membranes, the pins themselves are metallic devices that do not resorb by hydrolysis. Practitioners must therefore plan for their removal or long-term management according to the surgical treatment plan. Particular attention must be paid to the patient's general health, as factors such as diseases affecting bone metabolism or medical treatments altering bone density can influence device stability or the local biological response. Compliance with Hager & Meisinger GmbH sterilization protocols is the first indispensable precaution to prevent any post-operative infectious complications.

Who is the manufacturer and what standards are met?

This medical device is manufactured by Hager & Meisinger GmbH, a company located in Neuss, Germany. The pin refill for Master (MP10) is classified as a Class IIb medical device. It bears the CE0044 marking, certifying its compliance with current European regulatory requirements for long-term invasive or surgical medical devices. The Meisinger brand guarantees that these instruments are produced according to high quality standards, including precise instructions for reprocessing (cleaning, disinfection, and sterilization) to ensure maximum safety during each act of implant surgery or bone reconstruction.

Master-Pin refill (pin) - (MP10) - Meisinger - Hager & Meisinger GmbH (36BMP000010) - Delynov

The Réassort de pin's pour Master (pin) -- Meisinger - Hager & Meisinger GmbH (36BMP000010) is a medical device manufactured by Hager & Meisinger GmbH — Class IIb, CE marking CE0044.

Compliance: Medical device Class IIb, CE marking CE0044.
Manufacturer: Hager & Meisinger GmbH.
Reference: MP10.
Reserved for healthcare professionals. Read instructions carefully before use.

170.52 € 170.52 EUR 170.52 € Tax Included 255.53 €

170.52 € Tax Included 255.53 €

Manufacturer
Our selection

This combination does not exist.

Add to cart BUY NOW

GBR

What is the Meisinger pin refill for Master (MP10)?

The MP10 pin refill from the Meisinger brand is a medical device specifically developed for oral surgery interventions requiring membrane stabilization. This product comes in the form of bone surgery tacks or nails intended to be integrated into the Bone Management® Master-Pin-Control system. These components are essential for maintaining the physical barriers used during regeneration protocols in place. Manufactured by Hager & Meisinger GmbH, these devices meet the strict requirements of Class IIb. They are delivered non-sterile and imperatively require a cleaning, disinfection, and sterilization phase before any clinical use according to the protocols validated by the manufacturer.

What are the clinical indications for this bone surgery pin?

The use of this bone surgery pin is indicated for the fixation of apical membrane ends to the patient's local bone. The main clinical objective is to prevent any micromobility of the membrane, a critical factor for the success of guided bone regeneration (GBR). This system is versatile, allowing the fixation of resorbable membranes, non-resorbable membranes, as well as titanium-reinforced membranes. By stabilizing the membrane, the practitioner ensures the protection of the bone graft and promotes optimal osseointegration without mechanical interference during the callus formation period.

What are the technical characteristics of this Meisinger device?

The Meisinger MP10 refill is characterized by a design optimized for precise insertion into the bone. Although specific dimensions are not detailed here, the device is an integral part of the Master-Pin-Control system. To guarantee correct and safe use, the manufacturer Hager & Meisinger GmbH specifies that the recommended and maximum application speeds must be strictly respected, as summarized in the system's instrument overview. This equipment is classified as a Class IIb medical device under the CE0044 marking, guaranteeing its compliance with European safety and performance standards for short-term surgical implants.

What are the contraindications for the use of these membrane fixation pins?

The use of these membrane fixation pins is strictly contraindicated in several clinical situations. Absolute contraindications include incomplete dento-alveolar growth, except in exceptional cases such as ectodermal dysplasia. It is also forbidden to use these devices in the presence of an acute infection at the fixation site or pathological processes such as fever, local inflammation, or an abscess. Insufficient bone quality or quantity also prevents placement. Finally, relative contraindications concern known allergies to materials, systemic disorders, bone metabolism diseases, or medical treatments leading to a deterioration of the bone structure.

What are the removal and sterilization precautions?

As these are non-resorbable devices, Meisinger pins must be managed with care. They are supplied non-sterile, which requires the surgical office to scrupulously follow the processing instructions (cleaning, disinfection, and sterilization) provided by Hager & Meisinger GmbH before the surgical procedure. During the planning phase, the practitioner must take into account that these bone surgery nails are intended to temporarily stabilize the membrane. Compliance with hygiene protocols and rotation speeds during placement is essential to prevent any risk of material fracture or thermal necrosis of the surrounding bone, thus guaranteeing the durability of the regeneration treatment.

Who is the manufacturer and what standards are respected?

The pin refill for Master (MP10) is manufactured by Hager & Meisinger GmbH, a recognized company located in Neuss, Germany. This medical device is certified according to current European standards, bearing the CE0044 marking. It belongs to Class IIb, which corresponds to medical devices presenting a moderate to high potential risk, requiring a rigorous conformity assessment. As a product distributed by Delynov, this refill guarantees dental surgeons and implantologists access to high technical precision equipment, supported by certified manufacturing processes for bone surgery and soft tissue management.

State of the art

Guided bone regeneration (GBR) in implantology relies on membrane fixation quality.

Specifications

Manufacturer	Meisinger
Our selection	Best seller

Tags
Tags	GBR