Metal Rule 20 cm - Helmut Zepf (48.666.20) - Delynov
The Règle métallique de 20 cm - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 48.666.20.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf 48.666.20 metal ruler?
The 20 cm metal ruler, referenced under code 48.666.20 by Helmut Zepf, is a precision manual dental instrument designed for healthcare professionals. Manufactured from high-quality medical stainless steel, this ruler is a robust and durable tool intended for use in surgical and dental procedures. This Class I medical device is delivered non-sterile by Helmut Zepf Medizintechnik GmbH. Its metallic structure guarantees optimal resistance to reprocessing cycles, while offering clear readability for clinical measurements required in dental offices or operating rooms.
What are the clinical indications for this instrument?
The intended use of this Helmut Zepf manual dental instrument primarily concerns precision measurements during oral surgery, implantology, or general dentistry procedures. It allows the practitioner to accurately assess anatomical dimensions or distances between different points of interest during the procedure. As a measuring instrument, it is essential for ensuring compliance with surgical protocols. Its use is strictly reserved for qualified healthcare professionals, who must ensure the compatibility of the instrument with other products used during the intervention.
What are the technical characteristics of the 48.666.20 ruler?
This Helmut Zepf metal ruler is distinguished by its 20 cm length, providing sufficient reach for the majority of dental surgery needs. Designed entirely in medical stainless steel, it exhibits excellent resistance to corrosion and repeatable cleaning and sterilization cycles. The manufacturer specifies that due to the design and materials used, there is no defined maximum limit for the number of processing cycles, as long as the instrument shows no visible damage. Before each use, the practitioner must imperatively inspect the object to detect any potential cracks, breaks, or defects on the edges.
What are the contraindications for the use of this metal ruler?
The main contraindication for using this medical stainless steel instrument is metal intolerance in the patient. Contact with the instrument may, in some cases, cause a hypersensitivity reaction. If such an adverse reaction occurs during the intervention, the procedure must be stopped immediately and necessary clinical measures must be taken accordingly. It is therefore recommended to question the patient about their history of metal allergies before any handling. Furthermore, it is strictly forbidden to use the product if it shows visible signs of wear or structural damage compromising its precision or safety.
What are the maintenance and sterilization precautions?
As Helmut Zepf products are delivered non-sterile, a rigorous reprocessing procedure is mandatory before the first use and after each subsequent use. The complete protocol includes cleaning, disinfection, and sterilization of the instrument. It is crucial to clean each product before use to remove any residue. The manufacturer emphasizes the importance of checking for the absence of visible damage such as cracks or defects on the cutting edges before any intervention. Never use damaged or worn products. The durability of the instrument depends on the compliance of healthcare personnel with these safety and maintenance instructions.
Who is the manufacturer and what standards are met?
This instrument is manufactured by Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This medical device belongs to Class I (Class Ir according to certain reprocessing nomenclatures) and meets strict regulatory requirements for manual dental instruments. As the official manufacturer, Helmut Zepf guarantees the use of biocompatible materials such as medical stainless steel. Compliance with the instructions for use and safety provided by the manufacturer is essential to maintain the conformity of the device and ensure the safety of both the patient and the practitioner during dental care.
State of the art
Surgical medical consumables play a decisive role in operative safety.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |