Support for 1/1 plate 260mm length - Helmut Zepf (85.180.03)
The Support pour plateau 1/1 longueur 260mm - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 85.180.03.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the tray support 1/1 Helmut Zepf (85.180.03)?
The tray support 1/1 with a length of 260mm is a Class I medical device designed by Helmut Zepf Medizintechnik GmbH. This manual dental instrument is manufactured from high-quality medical stainless steel, ensuring robustness suited to the requirements of the surgical environment. It is specifically developed to integrate into instrumentation management protocols in dental practices and oral surgery. This product is delivered non-sterile by the manufacturer and requires rigorous preparation before its first use. Its stainless steel design allows for durable integration into the cleaning and sterilization cycles of surgical trays.
What are the clinical indications for this instrument?
The tray support 1/1 Helmut Zepf is indicated as a manual dental instrument intended for use by qualified healthcare professionals. Its intended purpose is to serve as a logistical and structural support for organizing instruments during dental surgery, implantology, or oral care procedures. As an accessory in the Helmut Zepf range, it maintains optimal organization of the technical tray, thereby facilitating access to the necessary instruments during the intervention. It is imperative to check the integrity of the support before each surgical act to ensure the absence of visible damage such as cracks or structural defects.
What are the technical characteristics of this 260mm support?
This technical support, referenced under code 85.180.03, has a length of 260mm, corresponding to the 1/1 tray format. Its full composition in medical stainless steel ensures compatibility with thermal and chemical reprocessing cycles. Helmut Zepf specifies that due to the product design and the materials used, there is no defined maximum limit for achievable treatment cycles, provided that the instrument shows no apparent wear or degradation. Compatibility with other devices in the sterilization chain must be verified beforehand by the practitioner to ensure the safety of the decontamination cycle.
What are the contraindications for the use of this device?
The main contraindication related to the use of this medical stainless steel instrument concerns metal intolerance in the patient. Contact with the instrument may trigger a hypersensitivity reaction. If such an intolerance reaction occurs during the procedure, the manufacturer Helmut Zepf stipulates that the intervention must be stopped immediately and necessary medical measures must be taken accordingly. Furthermore, the use of this support is strictly reserved for trained healthcare professionals. The use of a product showing visible damage, breakages, or marked signs of wear is formally prohibited to avoid any risk of complication.
What are the maintenance and sterilization precautions?
All Helmut Zepf instruments must imperatively be cleaned, disinfected, and sterilized before their very first use, as well as before each subsequent use. The cleaning process must be complete to eliminate all residues. It is crucial to inspect the support for any visible damage, such as cracks or defects on the edges, before each cycle. Never use damaged or worn products. As the products are delivered non-sterile, strict compliance with hospital or practice sterilization protocols is mandatory. The durability of the device depends directly on the quality of reprocessing and the absence of abnormal mechanical stress on the stainless steel structure.
Who is the manufacturer and what standards are respected?
The official manufacturer of this device is Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This tray support 1/1 is classified as a Class I medical device according to current regulations. The manufacturer applies rigorous production standards for its manual dental instruments, using exclusively medical stainless steel. As a Class I product, it meets the safety and performance requirements defined for non-invasive or reusable surgical instruments. Healthcare professionals must refer to the manufacturer's safety instructions to ensure use in compliance with hygiene and surgical safety standards.
State of the art
Surgical medical consumables play a decisive role in operative safety.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |