Curette Tip, M4x0.5 - Helmut Zepf (24.751.108GM5) - Delynov
The POINTE DE CURETTE. M4X0.5. - Helmut Zepf is a medical device manufactured by Helmut Zepf Medizintechnik GmbH.
- Compliance: Medical device Class I.
- Manufacturer: Helmut Zepf Medizintechnik GmbH.
- Reference: 24.751.108GM5.
- Reserved for healthcare professionals. Read instructions carefully before use.
fabricant : HELMUT ZEPF Medizintechnik Gmbh , Obere Hauptstraße 16-22, D- 78606 Seitingen-Oberflacht BUT PRÉVU / INDICATION Instrument dentaire manuel Les effets secondaires indésirables l'intolérance aux métaux chez le patient peut résulter d'un contact avec l'instrument, qui est en acier inoxydable médical une réaction d'hypersensibilité était toujours déclenchée devenir. la procédure doit être arrêtée si une telle réaction se produit et les mesures nécessaires sont prises en conséquence. consignes d'utilisation et de sécurité tous les instruments doivent être nettoyés avant d'être utilisés pour la première fois et compléter avant toute utilisation ultérieure nettoyé, désinfecté et stérilisé ! il est très important de nettoyer chaque produit avant utilisation dommages et usures visibles, par ex. b. fissures, cassures ou des défauts sur les arêtes de coupe. n'utilisez jamais de produits endommagés ou usés. les produits de helmut zepf medizintechnik gmbh sont livrés non stériles. les produits doivent être à l'avance nettoyé et stérilisé. la compatibilité aussi les autres produits doivent être vérifiés au préalable. retraitement en raison de la conception du produit, des matériaux utilisés et il ne peut y avoir de limite maximale définie pour l'utilisation prévue des cycles de traitement réalisables peuvent être déterminés.réservé aux professionnels de santé.
What is the Helmut Zepf 24.751.108GM5 curette tip?
The Helmut Zepf curette tip, reference 24.751.108GM5, is a high-precision manual dental instrument designed for oral surgery procedures. This Class I medical device is manufactured from medical-grade stainless steel, a material selected for its robustness and compatibility with surgical requirements. Featuring an M4X0.5 thread, this tip was specifically developed by Helmut Zepf Medizintechnik GmbH to integrate into the healthcare professional's arsenal. The product is delivered non-sterile, requiring a rigorous cleaning, disinfection, and sterilization protocol before its first use and between each patient to ensure optimal safety.
What are the clinical indications for this instrument?
This curette tip is indicated as a manual dental instrument for oral care and surgery procedures. It is intended exclusively for professional use by qualified practitioners. Its primary role is to assist the dental surgeon or implantologist in curettage and cleaning tasks at operative sites. The use of this Helmut Zepf brand instrument must always be preceded by a careful check of the cutting edge condition. It is imperative to check for the absence of visible damage such as cracks or breaks before any clinical intervention to maintain the efficiency of the surgical gesture.
What are the technical characteristics of the 24.751.108GM5 tip?
The Helmut Zepf curette tip is distinguished by its specific technical design with an M4X0.5 type thread. Manufactured by Helmut Zepf Medizintechnik GmbH in Germany, it uses high-quality medical stainless steel. Due to its Class I classification, it meets the regulatory requirements for manual instruments. A major feature of this product lies in its durability: according to the manufacturer, there is no defined maximum limit for processing cycles (cleaning and sterilization), as this is determined by actual wear and intended use. The practitioner must therefore evaluate the integrity of the instrument before each use.
What are the contraindications for the use of this stainless steel instrument?
The main contraindication for the use of this curette tip is known metal intolerance in the patient. Contact with medical stainless steel can, in certain cases, cause a hypersensitivity reaction. If such an allergic reaction or intolerance occurs during the procedure, the process must be immediately interrupted. Necessary medical measures must then be taken accordingly. Furthermore, the use of the instrument is strictly prohibited if it shows visible signs of wear, defects on the cutting edges, or structural damage, as this could compromise patient safety and treatment precision.
What are the maintenance and reprocessing precautions?
The reprocessing of the Helmut Zepf curette tip follows a strict protocol. All instruments must be cleaned, disinfected, and sterilized before the first use, and then after each subsequent use. It is crucial to perform a complete cleaning to remove all residues before the sterilization cycle. The manufacturer specifies that the products are delivered non-sterile. Compatibility with other devices used during the procedure must also be verified beforehand. Visual inspection is a key step: never use products that are damaged, worn, or show breaks. The lifespan of the instrument depends directly on compliance with these maintenance instructions and the frequency of sterilization cycles.
Who is the manufacturer and what standards are respected?
The official manufacturer of this device is Helmut Zepf Medizintechnik GmbH, located in Seitingen-Oberflacht, Germany. This product is classified as a Class I medical device according to current regulations. As a manual dental instrument, it is designed to meet the professional quality standards required in dental surgery. The manufacturer emphasizes that the use of this instrument is strictly reserved for trained healthcare professionals. Although the specific CE marking is not detailed in the provided sources, compliance with manufacturing standards for medical stainless steel and directives relating to Class I instruments ensures traceability and safety in accordance with sector requirements.
State of the art
Specialized surgical instrumentation is evolving towards ergonomic designs.
Specifications
| Manufacturer | Helmut Zepf |
| Tags | |
|---|---|
| Tags | |